How to Change the Pay Period from Weekly to Monthly on a TP100/200 Clocking in Machine

To access the machine settings a key is required (marked 134). You will have received a key when the machine was purchased with the user manual. If the key cannot be located then please call our sales team on 0113 258 7856. or use the link; https://www.clockingsystems.co.uk/collections/keys/products/time-precision-tp100-tp200-replacement-keys

• Firstly, using the key (marked 134) remove the lid.

•  ‘P1’ should be displayed on the screen as shown below

• Next press the ‘Afternoon OUT' button. If the machine is currently set to weekly then the display should show the following: 04 01 02 

• The 04 should be flashing and so use the '-' button to adjust this to '01' and then press the 'Overtime OUT' twice.

• The '02' on the right should now be flashing. If you would like the print to show the days of the week then leave this as '02'. If you would like the print to show the date then adjust with the '-' button to '01'.
• Press 'Overtime OUT' and the screen will go blank (If a blank screen is not achieved then the settings will not be saved correctly).
• Lastly place the lid back on and lock up. The time should appear on the screen. If the time does not appear on the screen then check that the lid has been placed on properly as it can be easy to mislocate the front lugs causing a gap below the front lid section.

The time should be displayed on the LCD.

The machine is now set to a monthly pay period.

Next Article