How to set the time on a TP100/200 Clocking in machine

Use the following procedure to set the time on a TP100 or TP200 clocking in machine:

To access the machine settings a key is required (marked 134). You will have received a key when the machine was purchased with the user manual. If the key cannot be located then please call our sales team on 0113 258 7856. or use the link; https://www.clockingsystems.co.uk/collections/keys/products/time-precision-tp100-tp200-replacement-keys

• Firstly, using the key (marked 134) remove the lid.

•  ‘P1’ should be displayed on the screen as shown below

• Next press the ‘Morning OUT’ button.

• After this use the ‘+’ button and if necessary to adjust the first flashing digit to ‘24’ for setting to 24 hour format, or set on ‘12’ if AM/PM is preferred. Press the ‘Overtime OUT’ button when correct.
• Using the ‘+’ or ‘-‘ buttons adjust the hour using the 24 hour clock format, i.e. 15 for 3pm and then press the ‘Overtime OUT’ button.
• Next set the correct minute using ‘+’ or ‘-‘ buttons and then press the ‘Overtime OUT’ button. N.B. If the exact time to the second is required then set this digit to the next minute and press the ‘Overtime OUT’ button on the second the minute changes.
• Once the last setting has been confirmed the screen will go blank. (If a blank screen is not achieved then the settings will not be saved correctly)
• Lastly place the lid back on and lock up. The time should appear on the screen. If the time does not appear on the screen then check that the lid has been placed on properly as it can be easy to mislocate the front lugs causing a gap below the front lid section.

The correct time should now be displayed.

Next Article