Introduction

To check or modify any settings on your VF200 device you must be logged in as a Administrator. Out of the box there is already an Admin Supervisor configured on the clock with the default password of 7856. We strongly urge you keep this password as a backup and to enrol at least one other Administrator with Face ID and an additional password. 

When you have enrol as an administrator you will then be able to log into the terminal quickly.

TABLE OF CONTENTS

• Introduction
• Enrolling an Administrator
• Logging in as an administrator

Enrolling an Administrator

To enrol a new Administrator follow the instructions below: 

1. Tap the screen if it is asleep and then in the bottom right corner tap ≡
2. Next tap on 'Admin' and the 'Admin login' box will appear.
3. At the bottom of this box tap the option 'Switch Method' 
4. On the 'Input Password' screen please enter 7856 and tap OK.
5. Tap on 'Admin Setting' and then on 'Enrol Admin'.
6. Next tap on 'Enrol Face' and then look into the circled area, adjusting your position if necessary.
7. When successful a screen will appear with your picture and some boxes to fill in.
8. Tap on 'Input User Name' and fill in your name (pressing shift twice will change to letters) and tap OK.
9. After that choose and type in a 6 digit password and tap OK.
10. Retype the password followed by OK
11. Finally tap the top left back button three time to return to the home screen.

Logging in as an administrator

When you have enrolled a new Administrator you will now be able to log into the device as this user, follow the steps below:

1. Tap the screen if it is asleep and then in the bottom right corner tap ≡
2. Next tap on 'Admin' and an 'Admin login' box will appear.
3. Look into the circled area, adjusting your position if necessary to bring up the main list menu

Next Article