Introduction

This is a step-by-step guide designed to instruct you on how to register Biotime or Totaltime. This can be used when first setting up Biotime or Totaltime or if the software has reverted to demo mode.

You can usually check this by looking at the bottom right corner of the screen.

Registering Bio/Totaltime

Log into Bio/Totaltime using the Username: 1ttadmin and the password: concorde123 (see image below).

After logging in, proceed to register the software by doing the following:

Click the button at the top that says "Registration"

When greeted by this screen, make sure the checkbox at the top under 'Internet access:' is checked and then continue to click the button labelled 'Upgrade to FULL Version' highlighted at the bottom (see below).

 

Once you have selected this a new window will appear and you will need to click on the checkbox that says "I have NOT previously registered on this site with my email address" then proceed to fill in the input fields. Once you have done this you will be left with a page that asks for you software , version number an key. The software will just be the software you are using , the version number will be in the top left and the registration key will also be in the top left. Once you have filled these in hit Produce Password.

When you have your password , copy and paste it into the Input field in the top right and press the enter button, this should then register your software for you.

Please note , if you are noticing that your registration keeps being undone then it may be that your region settings on windows aren't set to the UK and will need changing to UK format.

Next Article