Introduction

Welcome to our knowledgebase article on the TotalTime+ software and the Anviz A350C clocking machine. If you have recently purchased this product from our company, congratulations! We are excited to help you get started with your new clocking machine and software. This collection of articles is designed to provide you with a comprehensive guide on how to download, configure and install the TotalTime+ software. We will also explain what you should expect to find in the box with your Anviz A350C clocking machine.

This knowledgebase article is part of a folder of related articles that will guide you through every step of the installation process. If you encounter any issues or need further assistance, we also provide information on where to get help and how to book a chargeable session to have the software installed for you with a full training session. We are committed to providing our customers with the best service and support possible, and we hope that this guide will be helpful to you as you set up your new clocking machine and software.

TABLE OF CONTENTS

• Navigating through the guide
• Checking you have received everything
• Downloading the software
• Getting help

Navigating through the guide

As you navigate through the installation process of your new clocking machine software, we want to make it as easy and convenient for you as possible. To help with this, we have created a collection of articles on the left-hand side of the page. These articles are designed to guide you through each step of the installation process, from downloading the software to configuring it and getting it up and running.

We recommend you network the clock by plugging it into your network via ethernet cable for a smoother process, but this guide will also cover how to use USB. If you are using USB you can skip any Network sections and vice versa.

While you have the flexibility to jump to different sections at any point, we highly recommend that you follow the guide in the order that it has been written. This will ensure that you have the smoothest installation experience possible. Once you have completed a section, you will see a button at the bottom of the article that will allow you to move on to the next step. Please use this button to progress through the installation process.

We are committed to providing our customers with the best support possible, and we hope you find navigating through this guide a breeze.

Checking you have received everything

Upon receiving the Clocking Machine you should have the following items:

• Anviz A350C Card Swipe Terminal
• USB
• Clocking Machine Backplate
• Clocking Cards

Downloading the software

The software can be downloaded by using this link https://clockingsystems.co.uk/totaltimedownload/

We will also include a link further in the guide as downloading the software is not yet required.

Getting help

Should you get stuck at any point you can get help on this website by opening a ticket, or alternatively email [email protected]

We also offer a full install and training session, call 0113 258 7856 to learn more.

Next Article