Setting up the MB20 for Dispatch

• Take the terminal from the box and remove the fingerprint protective sticker.
• Remove quick set up guide sheet, wired connector and white proxy card.
• Place a small Clocking Systems sticker on to left of the terminal
• Power on
• Tick the box - untick & okay
• M/ok & okay
• Select Personalize Menu
  • User Interface
    • Scroll to ‘Slide Show Intervals’
      • Set to disabled
    • Scroll to ‘Idle Time to Sleep’
      • Set ‘User Defined’
        • Set to 1 & OK
        • Esc
  • voice
  • volume - set to 40
  • Esc to Main menu

 

• User Mgt
  • New User
  • User ID & okay
    • 7856
  • User Role - Super Admin
  • Scroll down to ‘Set Password’ and set to 587856
  • Esc to Main menu

 

• COMM
  • Ethernet
    • DHCP- set to ON
  • Server settngs
    • Set the Server IP address to 192.055.168.165 (for Biotime & Infotime just set to 000.000.000.000)
    • Set the Server Port to 17856
    • Set HTTPS to off
    • Esc to Main menu

 

• System
  • Date time
    • Manual Date & Time
      • Set the date & time correctly
    • Select Time zone – UTC
    • Date Format - DD-MM-YY
    • Esc
  • Attendance
    • Duplicate punch period - set to 1
    • Esc
  • Security
    • User ID masking - set to OFF
    • Scroll down to ‘Face Function’
      • Ok to turn off
      • Terminal will reboot

 

Add the Quick start guide, box back up & tick done

Next Article